BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 88 OF 150
##It is the electricity + start, automatic search + 00 the beginning and
the beginning of the numbe
##The default value is 0.(0-Disable,1-Enable )(Except T19P/T21P Models)
ldap.incoming_call_special_search.enable =
##The default value is 0,value of 0 to 2, respectively the ldap, ldap +
StarTLS and ldaps
ldap.tls_mode =
ldap.call_out_lookup =
##########################################################################
#############
## Features
##
##########################################################################
#############
features.normal_refuse_code =
features.auto_answer_delay =
features.allow_mute =
features.group_listen_in_talking_enable = 0
features.call_completion_enable =
features.call_num_filter =
features.direct_ip_call_enable =
features.relog_offtime =
features.ringer_device.is_use_headset =
features.factory_pwd_enable = 1
features.anonymous_response_code =
features.show_action_uri_option =
features.reset_by_long_press_enable =
features.show_anywhere_remote_office_enable =
features.upload_server =
features.call_log_show_num =
features.ldap.input_type =
features.call_invite_format =
phone_setting.logon_wizard_forever_wait =
features.transfer_type =
features.caller_name_type_on_dialing =
gui_input_method.delete =
features.off_hook_answer.enable =
features.auto_linekeys.enable = %AUTO_LINEKEYS%
##Only for T46G Models support this parameter
features.block_linekey_in_menu.enable =
features.shorten_linekey_label.enable =
features.blf_pickup_only_send_code =
##V80 do not support(T23/T27/T61/T66/T29/T46/T48/T21E2)##
##features.special_auto_answer_tone =
##It is configured in the middle of the screen shows the current default
at the bottom of the account name.
##The default is 0.CNT version 1.
features.show_default_account=
## Except T4X Models support this
features.reboot_in_talk_enable =
## Except T19P/T21P Models support this
features.barge_in_via_username.enable =
To Next Page
Loading...
