BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 87 OF 150
##It configures the IP address or domain name of the LDAP server.
##The default value is blank.
ldap.host =
##It configures the port of the LDAP server.
##The default value is 389.Integer from 1 to 65535.
ldap.port =
##It configures the LDAP search base which corresponds to the location of
the LDAP phonebook.
##Example:ldap.base = dc=yealink,dc=cn.
##The default value is blank.
ldap.base =
##It configures the user name for accessing the LDAP server.
##The default value is blank.
ldap.user =
##It configures the password for accessing the LDAP server.
##The default value is blank.
ldap.password =
##It configures the maximum of the search results returned by the LDAP
server to be displayed.
##The default value is 50.Integer from 1 to 32000.
ldap.max_hits =
##It configures the name attributes of each record to be returned by the
LDAP server.
##Multiple attributes are separated by spaces.Example:ldap.name_attr =sn
cn.
##The default value is blank.
ldap.name_attr =
##It configures the number attributes of each record to be returned by the
LDAP server.
##Multiple attributes are separated by spaces.Example:ldap.numb_attr =
Mobile ipPhone.
##The default value is blank.
ldap.numb_attr =
##It configures the display name of the contact record displayed on the
LCD screen. The value of this parameter must start with ¡°%¡± symbol.
##Example:ldap.display_name = %cn
##The default value is blank.
ldap.display_name =
##It configures the LDAP version.
##The default value is 3.
ldap.version =
##It enables or disables the phone to perform an LDAP search when
receiving an incoming call.
##0-Disabled,1-Enabled.
##The default value is 0.
ldap.call_in_lookup =
##It enables or disables the phone to sort the search results in
alphabetical order or numerical order.
##0-Disabled,1-Enabled.
##The default value is 0.
ldap.ldap_sort =
To Next Page
Loading...
