EasyManua.ls Logo

Yealink SIP-T46S - Page 93

Yealink SIP-T46S
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BROADSOFT PARTNER CONFIGURATION GUIDE YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 93 OF 150
###Except T20P/T22P/T41P/T42G Models
###It configures the contrast of the LCD screen.
###For SIP-T19P and SIP-T21P IP phones, it configures the LCD¡¯s contrast
of the phone only.
###For SIP-T26P IP phones, it configures the LCD¡¯s contrast of the
connected EXP39 only.
###For SIP-T28P IP phones, it configures the LCD¡¯s contrast of the IP
phone and the connected EXP39.
###For SIP-T46G IP phones, it configures the LCD¡¯s contrast of the
connected EXP40 only.
###The default value is 6.
phone_setting.contrast =
###Except T46G Model
##It configures the logo mode of the LCD screen (except for SIP-T20P IP
phones).
##For SIP-T19P/T21P/T22P/T26P/T41P/T42G IP phones:
##0-Disabled 1-System logo 2-Custom logo
##The default value is 0.
##For SIP-T28P IP phones:
##1-System logo 2-Custom logo
##The default value is 1.
##It enables or disables a text logo (for SIP-T20P IP phones).
##0-Disabled 1-Enabled
##The default value is 0.
phone_setting.lcd_logo.mode =
###Except T20P/T46G Models
lcd_logo.url =
lcd_logo.delete =
###Only T46G T48G Model supports the two parameters
###It configures the wallpaper displayed on the phone.
###Example:To configure a phone built-in picture (e.g., 1.png) to be
wallpaper, the value format is:
###phone_setting.backgrounds = Resource:1.png
###To configure a custom picture (e.g., custom1.png) to be wallpaper, the
value format is: Config:custom1.png
###The default value is Resource:Default.jpg.
phone_setting.backgrounds =
wallpaper_upload.url =
##########################################################################
#############
## Phone Setting BLF
##
##########################################################################
#############
###It enables or disables the phone to automatically configure the BLF
list keys in order.
###0-Disabled,1-Enabled.
###The default value is 1.
phone_setting.auto_blf_list_enable = 1
phone_setting.blf_list_sequence_type =
##########################################################################
#############
## Key Lock
##

Table of Contents

Other manuals for Yealink SIP-T46S

Related product manuals