Yealink SIP VP-T49G - Page 73

Yealink IP Phone XML Objects
63
The function keys and soft keys are listed in the following table:
Key Name
Operation
Function
Up/Down
Key
Pressing the up/down
key
For
CP860/SIP-T46G/T42G/T41P/T40P/T29G/T27P/T
23P/T23G/T21(P) E2/T19(P) E2: Browse texts
up and down line by line.
For SIP-T48G: Turn pages.
Note: Pressing the up/down key is not
applicable to SIP VP-T49G IP phones.
Left/Right
Key
Pressing the left/right
key
Turn pages.
Note: Pressing the left/right key is not
applicable to SIP VP-T49G/CP860 IP phones.
Exit
Pressing the ”Exit” soft
key
Tapping
(only for SIP
VP-T49G/SIP-T48G IP
phones)
Pressing the on-hook
key (only applicable to
CP860 IP phones)
Exit from the current XML screen.
Off-hook/
Line Key/
Speakerp
hone Key/
Off-hook
Key
Off hook
Pressing the line key/
Speakerphone Key/
Off-hook key
If the value of the LockIn is “no”, the phone
will enter the pre-dialing screen.
If the value of the LockIn is “yes”, the phone
will be no response to any operation.
Note: Pressing the line key is not applicable
to SIP-T19(P) E2/CP860 IP phones. Pressing
the off-hook key is only applicable to CP860
IP phones. Off hook is not applicable to
CP860 IP phones.
Cancel
Key
Pressing the “X” key
Return to the idle screen.
Note: Pressing the “X” key is not applicable
to SIP VP-T49G/SIP-T19(P) E2/CP860 IP
phones.
OK/√ Key
Pressing the “OK/√”
key
The function of “OK/√” key is calling the URI
defined by “doneAction”.
Note: Pressing the “OK/√” key is not
applicable to SIP VP-T49G IP phones.