HOSTED TELEPHONY HANDSET QUICK GUIDE
Placing an Internal Call
• Pick up the handset
• Dial internal extension number and press send function key
BASIC CALL FEATURES
Placing an External call
• Pick up the handset
• Then enter the phone number
Note: During a call, you can alternate between headset, hands-free speakerphone and handset modes by pressing
the
Headset
key or the
Speakerphone
key or picking up the handset. Headset mode requires a headset connected.
ANSWERING A CALL
• Using the handset: Pick up the handset.
• Using the speakerphone: Press speakerphone key, the call will answer in loudspeaker mode.
• Using the headset: Press headset key and press answer function key, the call will answer in headset mode.
Note: You can ignore an incoming call by tapping the
Reject
function key
ENDING A CALL
• Hang up the headset or tap the end call function key, if in loudspeaker mode press the loudspeaker button.
REDIAL
• Press the Redial button when using handset
• Press Redial button twice when the phone is idle to dial out the last dialed number.
• Press the Redial button when phone is idle to enter the Placed call list, tap the desired entry and press the
Redial button again.
• *66 and then press the send transfer button on the screen
YEALINK T41/T42
1 LCD Display
2. Notification Light
3. BLF/Line Keys
4. Mute/Headset/Voicemail/
Headset
5. Loudspeaker Mode
6. Volume
7. Dial Pad
8. Navigation/OK/ Keys
9. Function/Soft Keys
10. Speaker
11. Reversible Tab
12. Hookswitch
YEALINK T46
1 LCD Display
2. Notification Light
3. BLF/Line Keys
4. Mute/Headset
5. Voicemail/Hold/Redial/Transfer
6. Loudspeaker Mode
7. Volume
8. Dial Pad
9. Navigation/OK/ Keys
10. Function/Soft Keys
11. Speaker
12. Reversible Tab
13. Hookswitch
To Next Page
Need help?
General
