Yealink VC110 User Manual (English)

Other manuals for Yealink VC110

User Guide179 pages

Administrator's Guide321 pages

Admin Guide233 pages

Quick Guide8 pages

Deployment Guide5 pages

Questions and Answers:

J
Jeffrey GilbertSep 5, 2025
Why can’t I adjust the remote camera during an active call on my Yealink VC110?
- J
  Jonathan SandersSep 5, 2025
  If you can’t adjust the remote camera during a call, use the remote control to control the local camera to check whether the remote control can be used normally. Ensure that the far site has enabled the far-end camera control feature. Ensure that what you are controlling is the remote camera. Ensure that the far site supports the same call protocol as the local site.
A
arodriguezAug 25, 2025
What to do if I can’t hear audio during a call on my Yealink VC110 Conference System?
- R
  Reginald DixonAug 25, 2025
  If you can't hear audio during a call, ensure the local audio output device is correctly connected. Use audio diagnostics to check if the audio device is working normally. Make sure the ringer volume isn't set to the minimum. Also, check if the far site is muted.
A
Amanda BarajasAug 25, 2025
Why does my Yealink Conference System network keep losing packets?
- C
  copelandshannonAug 26, 2025
  If the network keeps losing packets, check the network availability and ensure the LED indicator on the Internet port illuminates green. Try using a low-speed connection to check for packet loss. Also, check the configuration of the network speed and duplex mode on the endpoint, switch, and router.
R
Robert FowlerSep 12, 2025
Why can’t I hear the other site clearly during a call on my Yealink Conference System?
- F
  Francisco FreemanSep 13, 2025
  If you're having trouble hearing the other site clearly during a call on your Yealink Conference System, first check that the speaker volume of the far site is not set too low. Muffled audio might be due to highly reverberant rooms, so speak closer to the phone. Also, adjust the priority order for your audio codec if you've selected a low-bandwidth audio codec to be first. For best results, ensure the caller uses a Yealink video conferencing endpoint. Lastly, dust and debris may affect audio quality, so avoid using liquid or aerosol cleaners on the phone.
A
Alan AndersonSep 6, 2025
Why can’t I view the local video image on my Yealink Conference System?
- J
  Jennifer TorresSep 6, 2025
  If you can’t view the local video image, check if the local camera is correctly connected to the VC110 unit. Ensure the camera is powered on and the LED indicator is green. Verify the camera is selected for the current video input source. Check the screen layout to see if the remote video image is shown in full size.
J
Jacqueline JohnsonSep 9, 2025
Why can't I hear the audio during a call on my Yealink Conference System?
- M
  markburnsSep 10, 2025
  If you can't hear audio during a call on your Yealink Conference System, here are a few things to check: Make sure the endpoint has selected an available audio output device and that the volume level on the endpoint is set appropriately. Also, verify that the microphone on the remote endpoint is not muted.
A
Anthony Williamson Jr.Sep 1, 2025
What to do if the Yealink VC110 display device is black?
- B
  Brenda BennettSep 1, 2025
  If the display device is black, verify the connection to the VC110 unit. Ensure the endpoint isn't in sleep mode by pressing any key on the phone or remote. Also, check if the display device is in sleep mode or turned off, and try changing the video input source.
S
Steven SmithSep 2, 2025
How to fix a Yealink VC110 Conference System remote control that is not working?
- K
  Kurt SanchezSep 2, 2025
  If the remote control isn’t working, check if the endpoint is powered on. Ensure the battery's positive and negative charges are correctly connected and that the battery has sufficient power. Also, check for any nearby fluorescent or neon signs that might interfere.
A
Andrew ArmstrongSep 10, 2025
What to do if the Yealink Conference System endpoint fails to conduct a video conference?
- H
  Haley GriffinSep 10, 2025
  If your Yealink Conference System endpoint fails to conduct a video conference, check the following: * Ensure the network is configured correctly and available, and that the display device doesn’t create a network anomaly. * Make sure the local endpoint can ping the IP address of the remote endpoint. * Verify that the entered call information is correct. * Confirm that the called party is powered on. * Ensure that a call can be established between the local and the remote endpoint. * Troubleshoot the problem according to the prompts.
R
Robert DavisAug 28, 2025
Why doesn't the Yealink VC110 Conference System display IP address?
- L
  Laura NolanAug 28, 2025
  If the status bar of your Yealink Conference System's display device isn't showing the IP address, check if the network is available. Ensure the LAN property is configured correctly and verify if the endpoint has enabled the hide IP address feature. Also, check if the endpoint has configured the firewall and NAT correctly.

Yealink VC110 Specifications

General

Digital zoom	4 x
Focus adjustment	Auto
Video codecs	H.264, H.263
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Video formats supported	H.263, H.264
Supported graphics resolutions	352 x 288, 704 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711a, G.722, G.722.1, G.722.1C
Line-in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Pan range	-100 - 100 °
Tilt angle range	-30 - 30 °
Security algorithms	128-bit AES, HTTPS, SRTP, SSL/TLS
Ethernet LAN data rates	10, 100 Mbit/s
Supported network protocols	TCP/IP (IPv4), DHCP/ stastic IP, HTTP/ HTTPS, SRTP/TLS, IEEE802.1X, LLDP-MED, VLAN
Current	2 A
Power consumption (max)	30 W
Power consumption (typical)	24 W
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %