What causes network packets loss on Yealink VC110?
If your Yealink Conference System network keeps losing packets, check if the network is available and if the LED indicator on the left of the Internet port illuminates green. Try using a low-speed connection to see if packets are still being lost. Check the configuration of the network speed and duplex mode on the endpoint, switch, and router.
What to do if I can’t hear audio during a call on my Yealink VC110 Conference System?
If you can't hear audio during a call, ensure the local audio output device is correctly connected. Use audio diagnostics to check if the audio device is working normally. Make sure the ringer volume isn't set to the minimum. Also, check if the far site is muted.
Why does my Yealink Conference System network keep losing packets?
If the network keeps losing packets, check the network availability and ensure the LED indicator on the Internet port illuminates green. Try using a low-speed connection to check for packet loss. Also, check the configuration of the network speed and duplex mode on the endpoint, switch, and router.
Why Yealink Conference System endpoint fails to call the far site via IP address?
If the endpoint fails to call the far site via IP address, ensure that at least one call protocol is enabled on both sites. Verify that the network is connected and configured correctly. If issues persist, ping the IP address of the far site.
How to check network availability on Yealink Conference System?
If the network is unavailable for your Yealink Conference System, check if the network is available and if the LED indicator on the left of the Internet port is green.
What to do if my Yealink VC110 endpoint fails to call the far site?
If your Yealink Conference System endpoint can't call the far site, verify that the near and far site networks are available. Check if the far site has enabled the DND (Do Not Disturb) feature, and confirm that the accounts are correctly registered, with the appropriate account used for the call. Ensure the number you're calling is correct and that the far site isn't rejecting your call. Also, check if a firewall is blocking inbound traffic or if the far site has reached its maximum call-in limit. If encryption is required, make sure both sites have it enabled and support the same call protocol.
Why is my Yealink Conference System remote control not working?
If the remote control for your Yealink Conference System isn't working, check if the endpoint is powered on. Ensure the battery's positive and negative charges are correctly connected, and verify the battery has sufficient power. Also, make sure there are no special fluorescent or neon signs nearby that could interfere with the remote control's signal.
How to improve bad video quality on Yealink VC110?
If the video quality on your Yealink Conference System is poor, ensure the display device has a suitable resolution. Check for packet loss and verify that the camera settings, such as brightness and white balance, are correctly configured. Avoid high-intensity indoor light or direct sunlight on the camera.
How to troubleshoot poor audio quality on Yealink VC110 Conference System?
If you're experiencing poor audio quality with your Yealink Conference System, ensure the local audio output device is correctly connected. Use the audio diagnose feature to check if the audio device is working normally. Make sure the ringer volume isn't set to the minimum and check if the far site is muted. Verify the local audio input device is correctly connected, and that the near site isn't muted. Also, check if the endpoint has enabled the auto-answer mute feature.
Why doesn't the Yealink VC110 Conference System display IP address?
If the status bar of your Yealink Conference System's display device isn't showing the IP address, check if the network is available. Ensure the LAN property is configured correctly and verify if the endpoint has enabled the hide IP address feature. Also, check if the endpoint has configured the firewall and NAT correctly.
General| Digital zoom | 4 x |
|---|---|
| Focus adjustment | Auto |
| Video codecs | H.264, H.263 |
| Maximum frame rate | 30 fps |
| Supported video modes | 720p, 1080p |
| Video formats supported | H.263, H.264 |
| Supported graphics resolutions | 352 x 288, 704 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080) |
| Voice codecs | G.711a, G.722, G.722.1, G.722.1C |
| Line-in | Yes |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Pan range | -100 - 100 ° |
| Tilt angle range | -30 - 30 ° |
| Security algorithms | 128-bit AES, HTTPS, SRTP, SSL/TLS |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Supported network protocols | TCP/IP (IPv4), DHCP/ stastic IP, HTTP/ HTTPS, SRTP/TLS, IEEE802.1X, LLDP-MED, VLAN |
| Current | 2 A |
| Power consumption (max) | 30 W |
| Power consumption (typical) | 24 W |
| Storage temperature (T-T) | -20 - 50 °C |
| Operating temperature (T-T) | 10 - 40 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
Weight and Dimensions| Depth | 151.5 mm |
|---|---|
| Width | 234.6 mm |
| Height | 161 mm |
| Package depth | 318 mm |
| Package width | 432 mm |
| Package height | 274 mm |
| Package weight | 5900 g |
To Next Page