Yealink W52P Configuring

Head Office:
Level 1 21 Shierlaw Ave Canterbury 3126, Victoria, Australia
1300 0 JINGL
1300 0 54645
www.jingl.com.au
Configuring Yealink W52P
1. View and record the unique MAC address of the base station which can be found at
the rear of the base station. (Alternatively via the Handset)
Network Settings
You can configure the base station to obtain network settings in one of the following ways:
DHCP: By default, the base station attempts to contact a DHCP server in your network to obtain the
valid network settings, e.g., IP address, subnet mask, gateway address and DNS address
STATIC: If the base station cannot contact a DHCP server for any reason, you need to configure the
IP address, subnet mask, gateway address, primary DNS address and secondary DNS address for the
base station manually.
The Handset in the W52P package is pre-registered to the base station
For the purpose of this document we will accept that DHCP is functional and network settings are
automatically assigned
For further details refer to Yealink Documentation
http://www.yealink.com/DocumentDownload.aspx?Cateld=142&flag=142

Yealink W52P Specifications

General

Caller ID	Yes
Lines quantity	- lines
Answering machine	No
Phonebook capacity	500 entries
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
Maximum indoor range	50 m
Maximum outdoor range	300 m
Voice codecs	G.711, G.723, G.726, iLBC
Number of melodies	9
Display diagonal	1.8 \
Display resolution	128 x 160 pixels
Headset connectivity	2.5 mm
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Standby time	100 h
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	108 mm
Width	153 mm
Height	45 mm
Height (max)	50 mm
Height (min)	144 mm