Yealink W56P - Optional Accessories; Connecting the Base Station

18
When two calls are on hold:
• Use the up or down navigation buttons to select the appropriate call, and
press Resume
• Select Swap to switch between the two calls.
Call Park
The call park feature allows you to put a call on hold on one phone and continue the
conversation from another phone.
To park a call:
1. After answering the call, press Options.
2. Press Transfer, then press OK.
3. Dial *34 plus the seven-digit phone number where you’d like to park the call.
• If you have four-digit dialing enabled, you must enter the leading
number before the seven-digit number. For example, for 8.555.3312 for
a local call.
4. Press the Call (green phone) button.
5. Press End.
To retrieve a parked call:
1. Dial *33 plus the seven-digit number of the phone.
• If you have four-digit dialing enabled, you must enter the leading number
before the seven-digit number. For example, 8.555.3312 for a local call.
2. 2. Press the Call (green phone) button.
Speed Dial
You can assign up to eight speed dial numbers – making it easier to call important
or frequently called contacts.
To assign a speed dial number:
1. Access the speed dial setup in one of these ways:
• Press OK to enter the main menu. Select Settings, Telephony and then
Speed Dial.
• On the keypad, press and hold down a number not already assigned to a
phone number for speed dial.
The screen will display all the available speed dial keys.