Yealink W56P - Page 19

19
2. Use the up or down navigation buttons to highlight the desired speed dial key,
and then press Assign.
3. Select the desired contact from the directory. Press OK to assign the number
to the selected speed dial key.
• If more than one number is stored for the contact, use the up or down
navigation buttons to select one phone number. Press OK.
To delete a speed dial number:
1. Press OK to enter the main menu.
2. Select Settings, Telephony and Speed Dial. The screen will display all the
available speed dial keys.
3. Use the up or down navigation buttons to highlight the desired speed dial key.
4. Press Clear Key or the left navigation button to delete the assigned speed
dial number.
To place a call using a speed dial key:
When the handset is idle, use the keypad to press and hold the number assigned to
the phone number you want to call.
Auto Answer
With auto answer, you can answer incoming calls by picking up the handset from
the charger cradle. The auto answer feature works only if the handset is placed in
the charger cradle.
To configure auto answer:
1. Press OK to enter the main menu.
2. Select Settings, Telephony and Auto Answer.
3. Press Change.
• To enable or turn on this feature, make sure the Auto Answer checkbox
contains a checkmark.
• To disable or turn o this feature, make sure the Auto Answer checkbox is
blank (no checkmark).