10
IM AQ7280-02DE
Safety Precautions
The general safety precautions described herein must be observed during all phases of operation. If the instrument is used in a
manner not specified in this guide, the protection provided by the instrument may be impaired.
YOKOGAWA
assumes no liability for the
customer’s failure to comply with these requirements.
The following symbols are used on this instrument.
Warning: handle with care. Refer to the user’s manual or service manual. This symbol appears on dangerous locations on the in-
strument which require special instructions for proper handling or use. The same symbol appears in the corresponding place in
the manual to identify those instructions.
Hazard, radiation of laser apparatus.
Direct current
Stand-by
Failure to comply with the precautions below could lead to injury or death.
W
ARNING
Use the Instrument Only for Its Intended Purpose
This optical measuring instrument is designed to measure the optical characteristics of light sources and evaluate their
performance. Do not use this instrument for anything other than as an optical measuring instrument.
Check the Physical Appearance
Do not use the instrument if there is a problem with its physical appearance.
AC Adapter
Do not use the other than AC adapter designed exclusively for the AQ7280.
To Next Page
Loading...
