YOKOGAWA AQ7280 - OPM;VLS Modules

59
IM AQ7280-02DE
Specifications



OPM/VLS modules

Item Specifications
Model AQ2780 OPM AQ2781 High
Power OPM
AQ2780V
OPM+VLS
AQ2781V High
Power OPM+VLS
AQ4780
VLS
Wavelength setting mode: 850/1300/1310/1490/1550/1625/1650 nm, Detail mode: 800 to
1700 nm (1 nm steps), CWDM mode: 1270 to 1610 nm (20 nm steps)
−
CW +10 to −70 dBm
+27 to −50 dBm
*1
+10 to −70 dBm
+27 to −50 dBm
*1
− Power range
CHOP +7 to −70 dBm
+24 to −50 dBm
*1
+7 to −70 dBm
+24 to −50 dBm
*1
−
Noise level
*2
0.5 nW(–63 dBm) 50 nW(–43 dBm) 0.5 nW(–63 dBm) 50 nW(–43 dBm) −
Uncertainty
*3
±5% −
Readout resolution 0.01dB −
Level unit Absolute: dBm, mW, μW, nW, Relative: dB −
Modulation mode CW, 270 Hz, 1 kHz, 2 kHz −
Averaging 1, 10, 50, 100 times −
Data save 100 data per file (up to 1000 files) −
Data logging Logging intervals: 0.5, 1, 2, 5, 10 sec., Number of data: 10 to 1000 data −
Optical Power
Meter(OPM)
Optical connector Universal Adapter: SC, FC, Ferrule Adapter: φ1.25 −
Wavelength − 650 ±20nm
Optical output power − −3 dBm or more (Peak)
Modulation mode − CW, CHOP (Approx. 2 Hz)
Optical connector − 2.5 mm ferrule type
Visible Light
Source(VLS)
Laser class − Class 3R
Dimensions Approx. 47 mm (W) × 87 mm (H) × 29 mm (D) (excluding projections)
Weight Approx. 140 g
*1 1300 to 1600 nm
*2 1310 nm
*3 Input power: 100 μW (-10 dBm), CW, 1310 ±20 nm, Spectral width: ≤10 nm, SM (ITU-T G.652), FC/PC, Wavelength setting: Measured wavelength
±0.5 nm, excluding a secular change of equipment.