YOKOGAWA DP harp EJX Series - Revision Information

Rev-1
IM 01C25B01-01E
Revision Information
 Title : Di󰀨erentialPressureandPressureTransmitters
EJ110, EJ120, EJ130, EJ310, EJ430, and EJ440
 Manual No. : IM 01C25B01-01E
Edition Date Page Revised Item
1st Mar. 2004 — New publication
15th Oct. 2014 2-2 2.8
• Add information for 1 to 5 V output.
2-5 2.9.1 • Add information for 1 to 5 V output.
2-7, 2-8 2.9.2 • Add information for 1 to 5 V output.
2-9 to 2-11 2.9.3 • Add information for 1 to 5 V output.
2-13 2.9.4 • Add EPL code. Revise applicable standard. Add information for
1 to 5 V output. Add note for electro static charge. Add electrical
connection.
2-14 2.10 • Add standard for PROFIBUS.
6-1 6.3 • Add Figure 6.1 Terminal.
6-2 6.3.3 • Add information for 1 to 5 V output.
6-3 6.4 • Add information for 1 to 5 V output.
6-5 6.6 • Add applicability.
7-6 7.6.1 • Add “10.Device information” in Figure 7.9.
7-7 7.6.3 •Addnoteinthegure.
7-8 7.6 •Add7.6.6PressureLRV/URVConguration.
7-9 7.6 •Add7.6.8OutputModeCongurationand7.6.9DisplayOut1
Conguration.
8-9 8.5.3 • Correct AL31 output operation.
9-2 to 9-4 9.1 • Add information for 1 to 5 V output.
9-5 •AddEMCstandardforPROFIBUSandEMIspecication.
9-12 to 9-17 9.2 • Add output signal code Q
9-19 9.3 • Revise the description for SU2 and SF2.
9-35 9.4
• Add information for 1 to 5 V output.
16th June 2015 1-3 1.1
• Add (g) and (h).
2-1, 2-12 Replacenameplategure.
2-4 to 2-7 NEMATYPE4X→Type4X.
2-6, 2-7 2.9.2 • Add C22.2 No.61010-2-030
2-14 2.5 •forProbus→forFieldbus
2-15 2.12 • Add C22.2 No.61010-1, C22.2 No.61010-2-030
7-7 7.6.3 • Add note for software revision 3.01.
7-6 to 7-10 Change layout.
9-5 9.1 • Modify ‘EMC conformity standards.’
9-26 9.4
• Add Bottom process connection for measurement span code F.
17th July 2015 2-5, 2-7, 2-9, 2-14 Delete /V1F.
2-12 to 2-15 2.9.4 • Add SU21. Add a and b.
9-5 9.1 • Revise descriptions for EMC conformity standards.
9-6 to 9-17 9.2 • Add material for mounting bracket code D and K.
9-18 9.2 • Delete #.
9-19 9.3
• Add SU21.
18th Sep. 2015 9-3 9.1
• Add condition for Burst Pressure Limits and Maximum Pressure
Limits.
9-21 9.3 • Add /HD.
9-22 to 9-25 9.4
• Add /HD.