25
6. Tap Continue if condition is met. This means
the automation will proceed to the next step only
if the garage door is closed. If you selected
Break if condition is met, the automation would
abort (stop, doing nothing further) if the garage
door is closed.
7. Tap Confirm.
8. Tap the + button again to add another
behavior to this button.
9. Select Notification.
10. There are two settings here. The Alarm
Strategies setting determines how this
notification will be sent out. The selected
strategy is identified in green text. If this strategy
is not correct, tap the strategy name and select a
new strategy in the dialogue box that appears.
Then tap Confirm.
11. To define the text of the notification, tap the
Notification Content box and type in your
message.
FlexFob Settings: Notifications,
Continued
M
To Next Page
Loading...
Need help?
General
