Yolink FlexFob User Manual

27
FlexFob Settings: Alexa
N
You can use the FlexFob to trigger Alexa
routines. You must have the Alexa app installed,
the YoLink skill installed and connected to your
YoLink app account.
Alexa regards the FlexFob’s four buttons as
motion sensors. Only the short-press/click
button behavior is recognized by Alexa (you can
still use the long-press behavior for other things
as Alexa ignores it) and in fact, you can still
assign a YoLink app function to this button
(although you are probably unlikely to need to do
this). It is not in the scope of this user guide to
cover set up of the Alexa skill or to cover
creating an Alexa routine, so the following
simplified instructions are provided:
1. Create a new routine in the Alexa app.
2. In the When This Happens section, select
Smart Home.
3. Find your FlexFob. Each button is identified
with an “_1, _2, _3,_4” appended to your
FlexFob’s name. Select the button that you’d like
to assign to this routine.
4. Tap the Detected button. Disregard the other
settings available.
5. Tap Next.

Yolink FlexFob Specifications

General

Brand	Yolink
Model	FlexFob
Category	Remote Control
Language	English