Yolink FlexFob - LED and Beep Behavior Guide; Initial Setup and App Integration; Powering Up the FlexFob

04
LED & Beep Behaviors
Blinking Red Once, Then
Green Once
Device Power Up
Blinking Red And Green
Alternately
Restoring to Factory
Defaults
Blinking Green Once
Button Pressed
Slow Blinking Green
Once
With One Beep
Action Ran Successfully
Slow Blinking Red Once
With Three Beeps
Action Failed to Run
Blinking Green Twice
Connecting to Cloud
Quick Blinking Green
Control-D2D Pairing in
Progress
Quick Blinking Red
Control-D2D Unpairing
in Progress
Slow Blinking Green
Updating
Fast Blinking Red Every
30 Seconds
Batteries are Low,
Please Replace the
Batteries
Get to Know Your FlexFob,
Continued
D
Power Up
E
Press any button on your fob
briefly.
Observe the LED blinks red then
green.