York HIDS006B21S - Removing Fan And Fan Motor

(Ducted Medium Static Type)
MAINTENANCE
4-18
SM-18001-rev.1
Phillips ScrewdriverTool
4.2.2.3 Removing Fan and Fan Motor
The indoor fan and the fan motor for (H,Y,C)IDM006 - 48B21S can be removed only from the bottom side.
(1) Remove the electrical box cover according to Section 4.2.2.2 “Removing PCB”.
(2) Disconnect the connector for the fan motor located on the PCB2. Then remove the wiring.
(3) Remove the lower M4 screws securing the inlet ange.
Qty. of Screws (A): One (For (H,Y,C)IDM006 - 012B21S)
Two (For (H,Y,C)IDM015 - 048B21S)
● (H,Y,C)IDM006 - 012B21S
● (H,Y,C)IDM015 - 048B21S
M4 Screws (x (A))
Inlet Flange
M4 Screws (x (A))
Inlet Flange
TURN OFF all POWER supply switches.