York YK Style H - Associated Literature; Conditioned Based Maintenance

Revision notes
Revisions made to this document are indicated in the following table. These revisions are to
technical information, and any other changes in spelling, grammar, or formatting are not included.
Table 2: Revision notes
Affected pages Description
8–9 YORK Chiller Access Manager security statement section added
18–19 Access level section updated
19–25 YORK Chiller Access Manager logon instructions added
Global YORK Chiller Access Manager access levels added to programmable setpoint
information for OptiView screens
Associated literature
Table 3: Associated literature
Manual description Form number
Variable Speed Drive – Operation 160.00-O1
Solid State Starter – Operation and Maintenance 160.00-O2
Floor Mounted MV SSS – Operation 160.00-O5
Unit Mounted MV SSS – Operation 160.00-O7
Installation – Unit 160.76-N1
Unit Operations and Maintenance 160.76-O1
OptiView
™
Control Center – Operation Manual
160.76-O2
Wiring Diagram – Field Connections for YK Chiller (Style H) with OptiView
™
Control
Center and Unit-Mounted SSS or Remote Medium Voltage SSS, Medium Voltage
VSD, or Medium Voltage EMS
160.76-PW1
Wiring Diagram – Field Connections for YK Chiller (Style H) with OptiView
™
Control
Center and Remote Medium Voltage SSS
160.76-PW2
Wiring Diagram – Field Connections for YK Chiller (Style H) with OptiView
™
Control
Center and Remote Medium Voltage VSD
160.76-PW3
Wiring Diagram – Field Control Modifications for YK Chiller (Style H) 160.76-PW4
Wiring Diagram – Model YK (Style H) with OptiView
™
Control Center and
Electromechanical Starter
160.76-PW5
Wiring Diagram – Model YK (Style H) with OptiView
™
Control Center and SSS with
Modbus, LV VSD with Modbus
160.76-PW6
Wiring Diagram – Field Connections for YK Chiller (Style H) with Low Voltage
Variable Speed Drive
160.76-PW7
Conditioned based maintenance
Traditional chiller maintenance is based upon assumed and generalized conditions. In lieu of
the traditional maintenance program, a Johnson Controls YORK Conditioned Based Maintenance
(CBM) program can be substituted. This CBM service plan is built around the specific needs for
the chiller, operating conditions, and annualized impact realized by the chiller. Your local Johnson
Controls Branch can propose a customized Planned Service Agreement that leverages real time
and historical data, delivering performance reporting, corrective actions required and data enabled
guidance for optimal operation and lifecycle assurance. The program will include fault detection
Model YK Style H Centrifugal Liquid Chillers with OptiView Control Center10