York YK Style H - Page 117

Table 114: Programmable
Button
V09 software
and earlier
V10 and later
with YORK
Chiller Access
Manager
Description
Select Run/Stop Operator Standard
Allows the user to select the Control Source for Run/Stop (Local, BAS or
Hardwire).
Select Cooling Operator Standard
Allows the user to select the Control Source for Cooling. (Local, BAS, 0 VDC
to 10 VDC, 4 mA to 20 mA, or PWM) and also set the remote analog signal
minimum and maximum value setpoints. The remote analog signal can
adjust the setpoint between the user selected Maximum (max signal) and
the user selected Minimum (min signal). Refer to Form 160.76-PW4 for
more details on the BAS interfaces.
Select Current
Limit
Operator Standard
Allows the user to select the Control Source for Current Limiting. (Local,
BAS, 0 VDC to 10 VDC, 4 mA to 20 mA, or PWM). The remote analog signal
can adjust the setpoint between 30% (max signal) and 100% (min signal).
Refer to Form 160.76-PW4 for more details on the BAS interfaces.
Table 115: Navigation
Button
V09 software
and earlier
V10 and later
with YORK
Chiller Access
Manager
Description
Home View View Returns the user to Home screen.
Setpoints View View Navigates to the Setpoints Screen.
Operations View View Navigates to the Operations Screen.
117Model YK Style H Centrifugal Liquid Chillers with OptiView Control Center