York YK Style H - Page 132

Table 131: Programmable
Button
V09 software
and earlier
V10 and later
with YORK
Chiller Access
Manager
Description
Standard Week
Start/Stop
Times
Operator Standard
For each day of the week, the user may specify a time for the chiller to
start and a time for the chiller to stop. The times specified in this entry
week will be used as the default for every week of chiller operation.
Exception Start/
Stop Times
Operator Standard
For each day of the week, the user may specify a time for the chiller to
start and a time for the chiller to stop. These Start/Stop combinations may
be scheduled up to five weeks in advance and also for the present week.
As each week goes by, the new schedule will be created for the present
week using the Exception specification in combination with the Standard
week definition, as described above.
Schedule
(Enabled /
Disabled)
Operator Standard
Allows the user to enable or disable the monitoring function which
enforces the scheduled starting and stopping of the chiller.
Repeat Sunday
Schedule
Operator Standard
Duplicates the schedule defined for Sunday for the remainder of the
standard weekdays.
Reset All
Exception Days
Operator Standard Deletes all programming for exception days within the next 6 weeks.
Select Operator Standard
Places a selection box around a start time for a given day. Use ◄ , ► , ▲
or ▼ cursor arrows to place the box around the desired start or stop time
for a given day.
Print View View Generates a Schedule print report.
Table 132: Navigation
Button
V09 software
and earlier
V10 and later
with YORK
Chiller Access
Manager
Description
Home View View Returns the user to Home screen.
Setup View View Returns to the previous Setup screen.
Model YK Style H Centrifugal Liquid Chillers with OptiView Control Center132