55
JOHNSON CONTROLS
FORM 150.72-NM3 (1020)
ISSUE DATE 10/05/2020
SECTION 5 – TECHNICAL DATA
55
21 Only tted on systems with single speed fans.
22 Only tted on systems with two speed fans.
23 Optional compressor manual motors starters (standard on CE units).
24 See sheet 3 of connection diagram for power input options.
25 Alternate connections shown for dierent two speed motor types.
26 Only tted on systems with a maximum of 4 fans.
27 220/230V units require a separate fuse for units w/4 or more fans per system.
28 Low ambient kit -FSC for fan -MF1 is only tted on systems with less than 4 fans.
29 Only tted on YLAA0350.
30 Only tted on YLAA0195 & 0350.
31 Input dual point circuit breaker option replaces input terminal block.
32 Field installed on remote evaporator units.
33 Fitted on units with single phase motors only.
34 Fitted on units with low ambient option only.
35 Only tted on units with an acoustic kit.
36 Only tted on heat recovery units.
37 Only tted on condensing units.
38 Omitted on condensing units.
ELECTRICAL NOTES AND LEGEND (CONTINUED)