Assembly Instructions
Step 1:
Attach the front stabilizer(#2) to the main frame(#1) with 2 Hexagon socket half
round head screw M10*105 (#77), 2 spring washers (#80) and 2 flat washers 10
(#81).
Step 2:
Attach two External hexagon screw M12*150 (#76) to the main frame (#1),
tighten the bolts with a Multifunctional wrench (#86).
Attach pedals (#44) to the main frame with the left two External hexagon
screw M12*150 (#76), then tighten. Pay attention to the direction.
To Next Page
Loading...
