You-Q ALEX - Controller Settings and Pre-Use Checks; Daily Checks Before Driving

4.4. Torque table
Use the general torques as indicated in the table below, unless specified otherwise
Thread Size Pitch (mm) Max. torque (Nm)
M4 0.7 3
M5 0.8 6
M6 1 10
M8 1.25 25
M10 1.5 50
M12 1.75 80
M14 2 120
The minimum torque values are 7 - 9 % below the maximum values.
Maintenance schedule & tooling
Service manual - Alex 15