You-Q ALEX - Replace a Rubber Suspension of a Castor Wheel

Procedure for ShortBase RWD
1. Remove the locking ring (A) and the screw
(B).
2. Remove the old rubber suspension (C).
3. Put the new rubber suspension on the
wheelchair.
4. Re-connect the wishbones.
A
C
B
5.2.2. Replace a rubber suspension of a castor wheel
NOTICE!
From 1-12-2013 all rubber suspensions have a coloured dot that indicates the
hardness:
• Blue (standard): 55 degr. Shore
• White (hard): 70 degr. Shore
Preparation
See section 5.1.
Procedure
1. Lift the wheelchair until the wheels are free
from the floor.
• Use a lifting platform.
2. Remove the screw (A), and the suspension
cover (B).
3. Remove screw D.
4. Remove the old rubber suspension (C).
5. Put the new rubber suspension on the
carrier frame.
B
A
C
D
Maintenance tasks & adjustments
Service manual - Alex
19