You-Q ALEX - Transporting the Wheelchair; Vehicle Transport Safety; Preparing for Transport

8. ShortBase RWD:
a. Loosen the screws (A + B). These can be
discarded.
b. Loosen screw D for easy motor removal.
c. Remove the old drive motor (C).
d. Proceed with step 9.
A
C
D
B
9. Install the new motor.
Use the screws and nuts that are enclosed with the new motor.
10. Install the mudguard.
11. Install the drive wheel.
a. Put some grease on the axle to prevent fretting.
b. Mount the drive wheel on the axle.
c. Make sure to lock the screw by folding the washer.
12. Make sure that the drive wheel does not interfere with the motor.
5.2.5. Replace a drive wheel
Preparation
See section 5.1.
Procedure
1. Lift the wheelchair until the wheels are free from the floor.
• Use a lifting platform.
2. Remove the screws (A).
3. Remove the old drive wheel (B).
4. Install the new drive wheel.
5. Make sure that the drive wheel does not
interfere with the motor.
A
B
Maintenance tasks & adjustments
Service manual - Alex
21