You-Q ALEX - Maintenance of the Wheelchair; Cleaning and Battery Information

5.2.7. Replace a castor wheel
Preparation
See section 5.1.
Procedure
1. Lift the wheelchair until the wheels are free from the floor.
• Use a lifting platform.
2. Remove screw, washer and nut (A).
3. Take out the old castor wheel (B) from the
castor fork (C).
4. Install the new castor wheel.
• Use a new lock nut.
B A
C
5.2.8. Replace a castor fork
Preparation
See section 5.1.
Procedure
1. Lift the wheelchair until the wheels are free
from the floor.
• Use a lifting platform.
2. Remove screw A.
• Use an spanner 10.
3. Remove the old castor fork (B) from the
carrier frame.
4. Install the new castor fork on the carrier
frame with screw A.
A
B
Maintenance tasks & adjustments
Service manual - Alex
23