You-Q ALEX - Battery Charging and Replacement

5.2.9. Replace the batteries
Preparation
See section 5.1.
Procedure
1. Unlock the interface mounting frames by
squeezing the locking lip (A) and turning the
locking pin (B) forward.
2. Remove the locking pin.
3. Repeat these steps for the locking pin at the
other side of the wheelchair.
2
1
A
B
4. Carefully swing the complete seating (A)
backwards and let it rest on its backrest
frametube.
A
5. Loosen the battery strap (A).
6. Open the battery cover (B).
B
A
Maintenance tasks & adjustments
24
Service manual - Alex