Yueming CMA0604-B-A - Page 12

7
Figure 1-6: CMA1309-B-A nameplate
Instructions of each parameter on the nameplate of the machine:
 Type: type of the machine;
 Laser type: CO
2
;
 Laser power: Rated power of the laser equipment;
 Working area: processing breadth of the equipment
 Power supply: the master input power supply of the equipment, depending on the voltage standard of
the country. Standard voltage is 220-240V, 50/60Hz;
 Full load current/power: the maximum current and power when the machine is operating(excluding
auxiliary equipment);
 Serial No.: the unique number of each machine;
 Date of production: the date on which the machine is produced;
Laser Series Equipment
Type: CMA1309-B-A
Laser type: CO
2
class IV
Laser power: 80 W
Working area: 1300mmX900mm
Power supply: 220-240V AC, 50/60Hz
Full load current/power: ＜ 1250W
Serial No: xxxxxxxx
Date of production:
Manufacturer:
Tel:
Website:
Address: