Yueming CMA0604-B-A - 1.7 System configuration; 1.8 Suitable materials; 1.9 Applicable fields; 1.10 Description of warning labels

8
1.7 System configuration
Component
Parts
Description
Movement
system
Motor
Step
Transmission
mechanism
Timing belt
Guide rail
Inner rail or external rail
Optical system
Reflector
Gold-plated silicon
Focus lens (mm)
75, 63.5, 50
Pneumatic
system
Blower
750W
Air pump
ACO-009D
Cooling system
Water tank +water
pump
Water tank, industrial water
chiller
Control system
Controller
5# controller
Control software
SmartCarve4.3 series
Table1-1 System configuration list
1.8 Suitable materials
CMA series machine is suitable for processing materials with good CO2 laser absorption characteristics, such
as fabrics, leather, wool and other non-metallic flexible materials; it is strictly prohibited to cut metal materials
and corrosive materials.
1.9 Applicable fields
CMA series laser equipment is suitable for professional users of clothing, trademarks, cloth toys, crafts,
advertising decoration, building decoration, packaging, printing, paper products and other industries.
1.10 Description of warning labels
Laser power warning label, which means that do turn on the machine before the laser
power is fully connected and do not remove the connected parts before the residual
voltage of the laser power is fully released
Top cover warning label, which means that do not open the top cover when the
machine is operating normally to prevent laser radiation
Warning label before operating, which alertsthe user to read the product manual
carefully before operating the machine to avoid machine damage and user injury