EMC Information
Use of this equipment adjacent to or stacked with other
equipment should be avoided because it could result in
improper operation. If such use is necessary, this equipment and
the other equipment should be obser
ved to verify that they are
operating normally.
Use of accessories, transducers and cables other than those
specified or provided by the manufacturer of this equipment
could result in increased electromagnetic emissions or
decreased electromagnetic, im
munity of this equipment and
result in improper operation.
Portable RF communications equipment (including peripherals
such as antenna cables and external antennas) should be used
no closer than 30cm (12 inches) to any part of the
Concentrator,
including cables specified by the manufacturer.
Otherwise, degradation of the performance of this equipment
could result.
Electric and magnetic environment guidance in use
Guidance and declaration of manufacturer -Electromagnetic emission
Emission test Compliance
RF emissions
CISPR 11
Group 1
RF emissions
CISPR 11
Class B
Emission of harmonics
IEC 61000-3-2
Class A
Voltage fluctuations /
flicker emissions IEC 61000-3-3
Complies
To Next Page
Loading...
Need help?
General
