Product characteristics Product
characteristics
I. Scope of application of the product
Oxygen for families and individuals, for health care,
beauty care. Contraindications: Disable for patients with
oxygen poisoning and oxygen allergy
II. Structural characteristics
Oxygen machine is mainly composed of compressor, adsorption tower,
pressure regulating valve, reversing valve, circuit board, shell, filter, remote
control, nasal oxygen pipe and so on.
Full plastic shell, safe and reliable.
With remote control function: can operate the machine
remotely, easy to use. With tired function: display the
total working time through the display screen.
Compressor with thermal protector, better ensure the safety of compressor
III. Principle of oxygen production
This machine takes ~220 V power supply as the power source, the air as the
raw material, uses the high quality molecular sieve, through the pressure
swing adsorption separation method (PSA method) at room temperature,
produces the high purity oxygen.
IV. Key technical indicators
1. rated power: AC220V,50Hz
2. rated input power :135 W
3. oxygen flow rate 1 L/min, oxygen concentration 90%
Oxygen flow rate 2~7 L/min, oxygen concentration
50~26%4, noise: front 43 dB (A)(average); whole machine
50 dB (A)
6. dimensions :22×18×29(cm)
7. altitude: no reduction in oxygen concentration from sea level to 1828
m
Less than 90% efficiency at 4000m
To Next Page
Loading...
Need help?
General
