Z-CAM E2 - Page 23

（1” ~1/8000”）*
Shutter Angle: Auto / Manual（1°~ 360°）
* The minimum shutter speed “1” is available only when" variable frame rate "is set to
“1”.
 Aperture: It shows the range of aperture of the lens, and can be adjusted manually if
it’s an electrical lens. Only for lenses with electronic contacts. If the lens used is a
purely mechanical without electronic contacts, the aperture value is not shown here.
 ISO: Auto or Manual, the range of ISO depends on the setting of Dual Native ISO,
and whether Wide Dynamic Range (WDR) is activated
WDR
ISO Control
ISO Range
Normal
Fine (Auto)
500 ~ 102400
Dual Native ISO
500 / 2500
WDR
Fine (Auto)
250 ~ 51200
Dual Native ISO
250 / 1250
 Minimum ISO: This setting will only be enabled when ISO is set to “Auto”. Range of
Min. ISO also depends on setting of Dual Native ISO, and whether Wide Dynamic
Range (WDR) is activated.
WDR
Dual Native ISO
Min. ISO Range
Normal
Fine (Auto)
500 ~ 3200
Dual Native ISO
N/A
WDR
Fine (Auto)
250 ~ 3200
Dual Native ISO
N/A
 Max ISO: This setting will only be enabled when ISO is set to “Auto”. Range of Max
ISO also depends on setting of Dual Native ISO, and whether Wide Dynamic
Range (WDR) is activated
WDR
Dual Native ISO
Max ISO