Z-CAM E2 - Camera Maintenance

 If water accidently invades the camera, please shut it down, take off the battery (if
any) and the memory card, and make the camera dry within 24 hours.
 As the camera’s heating range is 0-40°C, please do not place or use the camera in
an environment where the temperature is lower than 0°C or higher than 40°C.
 Please do not let the camera and the already installed lens face the sun.
 Please do not touch the image sensor while removing the lens.
 Please do not blow off any dust on the sensor with a dust blower.
 Please do not use any detergent containing organic solvent to clean the camera body
and the lens.
 Please use soft lens cloth to clean the camera body regularly.
 Please do not disassemble the camera by yourself.
 Please do not place the camera in a darkroom, a lab or other places where corrosive
chemicals are stored.
Disclaimer: All product features and technical specifications stated above are subjected to Z CAM’s sole interpretation
and explanation.