Why does my Zanussi ZDLN2521 trip the circuit breaker?
If your Zanussi Dishwasher is tripping the circuit breaker, it could be due to insufficient amperage to supply all appliances in use simultaneously. Check the socket amperage and the capacity of the meter, or turn off one of the other appliances in use. It could also indicate an internal electrical fault, in which case you should contact an Authorised Service Centre.
Why Zanussi Dishwasher programme does not start?
If the program on your Zanussi Dishwasher isn't starting, verify that the appliance door is fully closed. If a delay start is set, either cancel the setting or wait for the countdown to finish. Also, the appliance may be recharging the resin inside the water softener, which takes approximately 5 minutes.
What causes a Zanussi Dishwasher to leak from the door?
A small leak from the door of your Zanussi Dishwasher can be caused by the appliance not being level or the door not being centered on the tub. Try loosening or tightening the adjustable feet, and adjust the rear foot if necessary.
How to fix a Zanussi ZDLN2521 Dishwasher that won't drain?
If your Zanussi Dishwasher isn't draining water, try these steps: * Check the sink spigot to make sure it is not clogged. The lights related to the program buttons will flash twice intermittently if this is the problem. * Inspect the interior filter system and clear any blockages. * Ensure the drain hose isn't kinked or bent.
What to do if my Zanussi Dishwasher doesn't fill with water?
If your Zanussi Dishwasher isn't filling with water, there are several things you can check: * Ensure the water tap is fully open. The lights related to the program buttons will flash once intermittently if this is the issue. * Verify that the water supply pressure is adequate by contacting your local water authority. * Check the water tap itself to ensure it's not clogged. * Inspect the filter in the inlet hose for any blockages. * Make sure the inlet hose isn't kinked or bent.
Why is my Zanussi ZDLN2521 Dishwasher door leaking slightly?
If you notice a small leak from the door of your Zanussi Dishwasher, it may not be leveled correctly. Loosen or tighten the adjustable feet (if applicable) to level the appliance. Also, the door may not be centered on the tub; adjust the rear foot (if applicable) to correct this.
What to do if my Zanussi Dishwasher does not drain water?
If your Zanussi Dishwasher isn't draining water, several factors could be at play. If the lights related to the programme buttons flash 2 times intermittently, make sure the sink spigot is not clogged. Additionally, ensure that the interior filter system is not clogged and that the drain hose has no kinks or bends. These issues can prevent proper drainage.
General| Half-load | - |
|---|---|
| Cycle time | 227 min |
| Noise level | 47 dB |
| Drying system | AirDry |
| Delay start (max) | 3 h |
| Inverter technology | Yes |
| Dishwashing programs | 90min, Auto, Eco 50°C, Pre-wash, Quick |
| Number of place settings | 13 place settings |
| Number of washing programs | 6 |
| Number of temperature settings | 3 |
| Door color | Not applicable |
| Cord length | 1.5 m |
| Display type | LCD |
| Product size | Full size (60 cm) |
| Appliance placement | Fully built-in |
| Control panel color | White |
| Cutlery compartment type | Basket |
| Wi-Fi controlled | No |
| Current | 10 A |
| Connected load | 1950 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.5 W |
| Water consumption per cycle | 9.9 L |
| Energy consumption per cycle | 0.92 kWh |
Weight and Dimensions| Depth | 550 mm |
|---|---|
| Width | 596 mm |
| Height | 818 mm |
| Installation compartment width | 600 mm |
| Installation compartment height | 880 mm |
| Installation compartment height (min) | 820 mm |
Safety precautions for children and vulnerable individuals using the appliance.
General safety guidelines for the operation and use of the appliance.
Guidelines and warnings related to the proper installation of the dishwasher.
Critical safety information regarding the electrical hook-up of the appliance.
Instructions and warnings for connecting the dishwasher to the water supply.
Guidelines for safe and correct operation of the dishwasher during use.
Details on how to select and understand the different wash programmes.
Instructions for filling and using the salt container correctly.
Step-by-step guide to filling the rinse aid dispenser.
Guidance on adding detergent for optimal wash results.
Steps to choose and initiate a wash cycle.
Best practices for using cleaning agents for best results.
Information on the Machine Care programme for internal cleaning.
Detailed steps for cleaning the dishwasher's filter system.
Solutions for common issues affecting wash and drying performance.
To Next Page
