EasyManuals Logo

Zanussi ZITN643K User Manual

Zanussi ZITN643K
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can
make the terminal become too hot.
Use the correct electricity mains cable.
Do not let the electricity mains cable
tangle.
Make sure that a shock protection is
installed.
Use the strain relief clamp on the cable.
Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near sockets.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact our Authorised Service
Centre or an electrician to change a
damaged mains cable.
The shock protection of live and insulated
parts must be fastened in such a way that
it cannot be removed without tools.
Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
If the mains socket is loose, do not
connect the mains plug.
Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
2.3 Use
WARNING!
Risk of injury, burns and electric
shock.
Remove all the packaging, labelling and
protective film (if applicable) before first
use.
This appliance is for household use only.
Do not change the specification of this
appliance.
Make sure that the ventilation openings
are not blocked.
Do not let the appliance stay unattended
during operation.
Set the cooking zone to “off” after each
use.
Do not rely on the pan detector.
Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.
Do not operate the appliance with wet
hands or when it has contact with water.
Do not use the appliance as a work
surface or as a storage surface.
If the surface of the appliance is cracked,
disconnect immediately the appliance
from the power supply. This to prevent an
electrical shock.
Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
When you place food into hot oil, it may
splash.
WARNING!
Risk of fire and explosion
Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
The vapours that very hot oil releases can
cause spontaneous combustion.
Used oil, that can contain food remnants,
can cause fire at a lower temperature than
oil used for the first time.
Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
WARNING!
Risk of damage to the appliance.
Do not keep hot cookware on the control
panel.
Do not put a hot pan cover on the glass
surface of the hob.
Do not let cookware boil dry.
Be careful not to let objects or cookware
fall on the appliance. The surface can be
damaged.
Do not activate the cooking zones with
empty cookware or without cookware.
Do not put aluminium foil on the
appliance.
ENGLISH 5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zanussi ZITN643K and is the answer not in the manual?

Zanussi ZITN643K Specifications

General IconGeneral
Boost functionYes
Large cooking zone3700 W
Number of boosters2
Simmer cooking zone2500 W
Regular cooking zone1800 W
Number of power levels15
Timer typeDigital
Control typeTouch
Timer duration99 min
Built-in display-
Control positionTop right
Hob typeZone induction hob
Product colorBlack
Hob width size59 cm
Top surface typeCeramic
Appliance placementBuilt-in
Cooking zone 2 typeLarge
Cooking zone 3 typeRegular
Cooking zone 4 typeSimmer
Cooking zone 2 boost3400 W
Cooking zone 2 power2300 W
Cooking zone 4 power1400 W
Cooking zone 1 positionLeft rear
Cooking zone 2 positionLeft front
Cooking zone 3 positionRight rear
Cooking zone 4 positionRight front
Number of cooking zones4 zone(s)
Simmer cooking zone shapeRound
Cooking zone 3 power sourceElectric
Large cooking zone diameter210 mm
Number of gas cooking zones0 zone(s)
Simmer cooking zone diameter145 mm
Regular cooking zone diameter180 mm
Connected load (gas)- W
Weight and Dimensions IconWeight and Dimensions
Depth520 mm
Width590 mm
Height- mm
Installation compartment depth490 mm
Installation compartment width560 mm
Installation compartment height44 mm

Related product manuals