The DSP-Z8 IV II Mobile Apps
The Zapco DSP-Z8IV II apps for Android and iOS are identical and allow you to setup and tune
your system with your smart phone or tablet. The goal here was to have a control system that
made sense in a smaller platform but would allow the user to do everything necessary for a
complete setup and tine. With the system on, you will see
zapco dsp music BT ####
and
Not Connected
. Choose that BT to connect to the DSP and the indicator will light constant blue.
When you open the ZIV II APP on your smart
device, it will sync to the settings that are in
the active preset in your DSP, so you will always
open the app to the settings you were last
listening to. After the APP Syncs to the DSP, the
Opening page
gives you immediate access to
the System Volume (
1
) and the Subwoofer
Volume (
2
). A drop-down menu (
3
) shows the
active signal source. You can click the source
menu to get all the input choices if you want
to work in a different input source. At the
bottom is the DSP “Mode” (
4
). The active
preset will show. Here you can choose a
different memory preset to start from if you
wish. The speaker icon (
5
) lets you quickly mute
all channels. Advanced Setup (
6
) opens all the
tuning pages but cannot be opened in
“Demo” mode. You can only enter Setup after
the Smart device is paired to the DSP and has
been sync’d.
6
3
1
2
4
5
To Next Page
Loading...
Need help?
General