Zapi COMBI AC1 - Config menu “SPECIAL ADJUSTMENTS functions list

9.5.4 Config menu “SPECIAL ADJUSTMENTS ” functions list
1) ADJUSTMENT #1
(Factory adjusted). % value. This is the Gain of the Pump chopper Current
Sensing Amplifier.
NOTE: only Zapi technicians should change this value.
2) SET CURRENT
set the current limit for the measurement in the TESTER menu.
3) AUX OUTPUT #1
Debug function.
4) AUX OUTPUT #2
Debug function.
Page - 54/86 AEQZP0BA – COMBI AC1 - User Manual