6
English
Important information
Before using or maintaining this product, it is important to
read the following safety instructions. Failure to follow and
apply all the instructions and procedures covered in this quick
guide will invalidate the guarantee and cause Zaptec Charger
AS and direct partners towaive all liability and claims for
compensation.
WARNING!
! Read through the instructions carefully and familiarize yourself with the equipment
before you start using it.
! This equipment must only be installed, repaired, and maintained by qualified
personnel. Repairs must be carried out by Zaptec or a pre-approved workshop.
! All applicable local, regional, and national laws and regulations must be followed
when installing, repairing, and maintaining the product.
! Do not install or use a product which is damaged in any way. See the information
in the chapter on Support and Repairs.
! Only use approved cabling for the installation.
! Do not insert foreign objects into the Type 2 socket.
! Do not use high-pressure washers to clean the charger station.
Follow the instructions in the chapter Storage and Maintenance.
! Avoid installing the charger in a location which is exposed to direct sunlight.
! Adapters are permissible – A conversion adapter from the charger outlet must only
be used if specified and approved by the vehicle manufacturer or charger producer
! Read the guarantee at zaptec.com/guarantee or contact Zaptec support
and request a copy.
To Next Page
Loading...
Need help?
General
