ZCS Azzurro 3000SP - 6.4. Menu; 6.4.1. Settings Menu

32 / 58
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 11/06/2019 Rev. 1.8 “User Manual for 3000SP storage inverter”
Make sure that the display of the 3000SP storage inverter shows that the power produced by the
photovoltaic modules is equal to the sum of the power consumed by the utility, fed in/out from the
grid and exchanged with the batteries.
If the working mode has not been changed, or if the storage inverter is operating in “Auto mode”:
• If the power generated is greater than the power consumed by the loads and the battery is not fully
charged, the 3000SP will start to charge the battery pack.
• If the power generated is less than the power consumed by the loads and the battery is not fully
discharged, the 3000SP will start to discharge the battery pack.
NOTE: This start-up procedure must be repeated each time the CT connection is changed
6.4. Menu
From the main screen, press the “Menu/Back” button to enter the main menu. The main menu
contains five different options:
Main menu
1. Settings
1. Enter Setting
2. Event list
2. Event List
3. System info
3. System Info
4. Software update
4. Software Update
5. Energy Statistics
5. Energy Statistics
6.4.1. Enter Settings:
1.Settings
1.Battery Parameters
8.Date and time
2.Delete Energy Data
9.EPS Mode
3.Clear events
10.DRMs0 Control
4.Set Country
11.Self-test
5.Commun.Address
Select.
12.Working mode
6.Enable Country
Change
13.Set safety parameters
7.Language