ZCS Azzurro 3000SP - 7. Technical Specifications

50 / 58
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 11/06/2019 Rev. 1.8 “User Manual for 3000SP storage inverter”
7. Technical specifications
Technical specifications
3000SP
Battery Connection technical data
Type of compatible battery
Lithium ion / Lead / Gel / Salty Water, etc.
Rated voltage
48V
Allowable voltage range
42-58V
Recommended battery capacity
50-200Ah
Maximum charge/discharge power
3000W
Allowable temperature range
-10°C/50°C
Maximum charge current
65A (programmable)
Maximum discharge current
65A (programmable)
Charge curve (Lithium)
Managed by the battery’s BMS
Charge curve (other type of battery)
2 adaptive stages with maintenance
Depth of Discharge (DOD)
10-90% Lithium Ion (programmable)
10-50% Lead Gel (programmable)
AC Input (Grid side)
Rated power
3000 W
Maximum Power
3000 VA
Maximum current
13 A
Type of connection / rated voltage
Single-phase L/N/P 220, 230, 240 V
AC voltage range
180-270V (according to the local standards)
Rated frequency
50 Hz / 60 Hz
AC frequency range
44-55Hz / 54-66Hz (according to the local standards)
Total harmonic distortion
<3%
Power factor
1 default (Adjustable +/- 0.8)
EPS Output (Emergency Power Supply)
Power supplied in EPS mode
3000 VA
EPS output voltage and frequency
230 V / 50Hz-60Hz
Current supplied in EPS mode
13 A
Total harmonic distortion
<3%
Switch time
< 3 s default (adjustable from 1 to 999 s)
Efficiency
Maximum charge efficiency
94.1%
Maximum discharge efficiency
94.3%
Consumption in standby
<5W
Protections
Safety protections
Anti-islanding, RCMU, Ground Fault Monitoring
Overheating protection
Yes
Protection class
I
Battery soft start
Yes
Standard
EMC
EN 61000-6-1/2/3/4
Safety standard
IEC 62116, IEC 61727, IEC 61683, IEC 60068-1/2/14/30, IEC 62109-1/2
Grid connection standard
CEI 0-21, RD1699, AS4777, VDE 0126-1-1, G83/2, EN50438, VDE-AR-N4105,
UTEC15/712-1
Communication
Communication interfaces
Wi-Fi, RS485 (proprietary protocol), SD card, CAN 2.0 (for battery connection)
Additional inputs or connections
Input for DC current sensor connection + 3 inputs for AC current sensor connection
Data storage on SD
25 years
General data
Allowable ambient temperature
range
-25°C...+60°C (power limitation above 45°C)
Topology
High-frequency isolation