9
Load Media
9/28/12 105SLPlus™ Quick Reference Guide P1056467-001
Load Media
Use the instructions in this section to load roll media in Tear-Off mode (Figure 3). For
instructions for loading fanfold media or for loading in different print modes, refer to the User
Guide.
Figure 3 • Tear-Off Mode Media Path
To load roll media in Tear-Off mode, complete these steps:
1. Remove and discard any tags or labels that are dirty or that are held by adhesives or tape.
Caution • When you are loading media or ribbon, remove all jewelry that could come into
contact with the printhead or other printer parts.
Tag Stock Labels
To Next Page
Loading...
Need help?
General
