Data Capture
112
The digital scanner can also read a bar code presented within the aiming dot not centered. The top examples
in Figure 75 show acceptable aiming options, while the bottom examples can not be decoded.
Figure 74 Scanning Orientation with Aiming Dot
The aiming dot is smaller when the digital scanner is closer to the symbol and larger when it is farther from the
symbol. Scan symbols with smaller bars or elements (mil size) closer to the digital scanner, and those with
larger bars or elements (mil size) farther from the digital scanner.
The digital scanner beeps to indicate that it successfully decoded the bar code. Refer to the Product Reference
Guide for more information.
Pairing Using Near Field Communication
The device provides the ability to pair the imagers using NFC.
To pair using NFC:
1. Ensure that the imager is in SSI mode. Refer to the imager Product Reference Guide for more information.
2. Ensure that NFC is enabled on the device.
3. Align the NFC icon on the RS6000 with the NFC antenna on the device.
The RS6000 Status LED blinks blue indicating that the RS6000 is attempting to establish connection with
the device. When connection is established, the Status LED turns off and the RS6000 emits a single string
of low/high beeps.
A notification appears on the Notification panel and the icon appears in the Status bar.
To Next Page
Loading...