Getting Started
20
Setting Touch Panel Mode
The device display is able to detect touches using a finger, or a gloved finger.
NOTE: A glove can be made of medical latex, leather, cotton, or wool. For optimal performance use a Zebra certified stylus.
To configure the touch panel mode:
1. Swipe down from the top to open the Quick Settings panel and then touch .
2. Touch Display.
3. Touch Advanced.
4. Touch Touch panel mode.
5. Select an option to choose the method by which the screen reacts to touch:
• Glove and Finger (Screen Protector off) to use a finger or a gloved finger on the screen without a screen
protector.
• Glove and Finger (Screen Protector on) to use a finger or a gloved finger on the screen with a screen
protector.
6. Touch to return to the Home screen.
General Sound Settings
Use the Sound settings to configure media and alarm volumes.
To access sound settings:
1. Swipe down from the top to open the Quick Settings panel and then touch .
2. Touch Sound.
3. Touch an option to set sounds.
Figure 11 Sound Screen - Zebra Volume Controls and Advanced Settings
To Next Page
Loading...