Data Capture
110
Scanning with the DS8178 Bluetooth Scanner
NOTE: The standard digital scanner emits a red illumination with a red aim dot. The Healthcare configuration emits a white
illumination with a green aim dot.
Hand-Held Scanning
1. Aim the digital scanner at a barcode and pull the trigger to decode.
Figure 72 DS8178 Aiming Dot on Barcode - Hand-Held Mode
2. Press the trigger until the digital scanner beeps, indicating the bar code is successfully decoded. Refer to
the Product Reference Guide for more information on beeper and LED definitions.
3. The captured data appears in the text field.
To Next Page
Loading...