Data Capture
106
To scan with the DS2208:
1. Place the aiming pattern over the bar code. See DS22X8 Aiming on page 109.
Figure 67 DS2208 Aiming Pattern on Bar Code
2. Press and hold the trigger until either:
a. The digital scanner reads the bar code. The digital scanner beeps, the LED flashes, and the scan line
turns off.
or
b. The digital scanner does not read the bar code and the scan line turns off.
3. Release the trigger.
4. The captured data appears in the text field.
Scanning with the DS2278 Cordless Scanner
2D bar codes have made their way to the Point of Sale (POS), appearing on everything from customer
purchased items to printed and electronic coupons and loyalty cards. 1D scanners cannot capture the new 2D
codes, leading to exceptions that slow down the check-out process. The DS2278 digital imager scanner scans
both 1D and 2D bar codes and does not compromise performance or features.
Hand-Held Scanning
To scan with the DS2278:
1. Pair the DS2278 with the device. See Pairing a Bluetooth Scanner on page 117
for more information.
2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).
To Next Page
Loading...