100
Wireless
Introduction
This section provides information on the wireless features:
• Wireless Local Area Network (WLAN)
• Bluetooth
• Near Field Communications (NFC - CC6000 Only)
Sharing the Mobile Data Connection
The tethering & portable hotspot settings allows sharing the mobile data connection with a single
computer via USB tethering or Bluetooth tethering. Share the data connection with up to eight devices
at once, by turning it into a portable Wi-Fi hotspot. While the device is sharing its data connection, an
icon displays at the top of the screen and a corresponding message appears in the notification list.
Enabling Bluetooth Tethering
Use Bluetooth tethering to share the data connection with a host computer.
Configure the host computer to obtain its network connection using Bluetooth. For more information,
see the host computer’s documentation.
1. Pair the device with the host computer.
2. Swipe down from the Status bar to open the Quick Access panel and then touch .
3. Touch Networking & Internet.
4. Touch Hotspot & tethering.
5. Touch the Bluetooth tethering switch to enable.
The host computer is now sharing the device’s data connection.
To stop sharing the data connection, touch the Bluetooth tethering switch again.
Enabling Wi-Fi Hotspot
To enable the Wi-Fi Hotspot:
1. Swipe down from the Status bar to open the Quick Access panel and then touch .
2. Touch Network & Internet.
To Next Page
Loading...