EasyManua.ls Logo

Zebra Customer Concierge CC600 - Setting Night Light; Setting Screen Timeout

Zebra Customer Concierge CC600
137 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting Started
18
2. Slide the icon to adjust the screen brightness level.
Figure 9 Brightness Slider
Setting Night Light
The Night Light setting tints the screen amber, making the screen easier to look at in low light.
To enable night light:
1. Swipe down from the top of the screen to open Quick Settings and then touch .
2. Touch Display.
3. Touch Night Light.
4. Touch Schedule.
5. Select one of the schedule values:
None (default)
Turns on at custom time
Turns on from sunset to sunrise.
6. Touch Status.
By default, Night Light is disabled. Toggle the switch to enable.
7. Adjust the tint using the Intensity slider.
8. Touch to return to the Home screen.
Setting Screen Timeout
To set the screen sleep time:
1. Swipe down from the top to open the Quick Settings panel and then touch .
2. Touch Display > Advanced > Sleep.
3. Select one of the sleep values.
15 seconds
30 seconds
•1 minute
2 minutes
5 minutes
10 minutes
30 minutes
4. Touch to return to the Home screen.

Table of Contents

Related product manuals