Zebra GK420t Setup Instructions

3 | P a g e
f). Load hangtag stock into the printer
g). Close printer lid, press down to be sure the lid latches engage
h). Turn printer on with toggle switch on back of printer, wait 10 seconds for printer to power on.

Zebra GK420t Specifications

General

Color	No
Maximum resolution	203 x 203 DPI
Ribbon length	74 m
Media thickness	0.08 - 0.2 mm
Maximum media length	991 mm
Maximum roll diameter	127 mm
Supported paper width	104 mm
Media thickness (imperial)	0.003 - 0.0075 \
Maximum media length (imperial)	39 \
Supported paper width (imperial)	4.09 \
Standard interfaces	Ethernet
USB 1.1 ports quantity	1
Connectivity technology	Wired
Weight (imperial)	4.6 lbs
Dimensions (WxDxH)	194 x 254 x 191 mm
Flash memory	4 MB
Certification	-FCC Part 15, -Subpart 15, - VCCI, -C-Tick, -EN55022 Class-B, -EN6100-3-2, -EN6100-3-3, -EN55024, -CCC, -CB Scheme IEC 60950: 1991 +A1 +A2 + A3 +A4, -TUV NRTL, -IRAM, -NOM, -AAMI.
Internal memory	8 MB
Built-in barcodes	Code 39, Code 49, Code 93, MaxiCode, PDF417, Postnet, QR Code, UPC-A, UPC-E
Page description languages	EPL2
Storage temperature (T-T)	-40 - 140 °F
Operating temperature (T-T)	5 - 41 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Power requirements	100 - 240 VAC, 50 - 60 Hz
Package weight	4100 g

Weight and Dimensions

Weight	2100 g