Getting Started
Connecting your Printer to a Computer
26
980611-001 Rev. C GX420d™ / GX430d™ User Guide 8/4/10
Parallel Port
The required cable must have a 25 pin “D” type (DB-25P) male connector on one and a
Centronics on the end (IEEE 1284 A-B parallel interface specification). Early models of G-
Series printers originally supported parallel cables with two 25 pin “D” type (DB-25P) male
connectors on both ends (IEEE 1284 A-A parallel interface specification).
To Next Page
Loading...