Zebra GX430D User Manual

27
Getting Started
Connecting your Printer to a Computer
8/4/10 GX420d™ / GX430d™ User Guide 980611-001 Rev. C
Ethernet
The printer requires UTP RJ45 Ethernet cable rated CAT-5 or better.
For more information on configuring your printer to run on a compatible Ethernet based
network, see the ZebraNet® 10/100 Internal Print Server manual. The printer must be
configured to run on your LAN (local area network) or WAN (wide area network). The print
server on board your printer can be accessed through the printer’s Web pages.
Ethernet Status/Activity Indicators
Ethernet Cable
(RJ45 Connector)
LED Status Description
Both OFF No Ethernet link detected
Green 100 Mbps link detected
Green with the Amber
flickering on and off
100 Mbps link and Ethernet activity detected
Amber 10 Mbps link detected
Amber with the Green
flickering on and off
10 Mbps link and Ethernet activity detected
Green LED Amber LED

Zebra GX430D Specifications

General

Brand	Zebra
Model	GX430D
Category	Printer
Language	English